Dryer Belt Replacement: How to replace dryer belt?

Dryer Belt Replacement: If you are looking for; how to replace the dryer belt? Then stop wondering because you are at the right place. Your dryer’s drum belt goes around the drum and sits between the panels inside the appliance.

The dryer’s drum belt might get damaged or snap if the machine is overloaded or if the stress is transferred to other parts. If the belt on the dryer drum brakes, the drum will stop turning.

Gas dryers and electric dryers both dry clothes by turning the drum, but they do so in different ways. As the drum turns, the clothes, towels, or bedsheets are tossed around in a circular motion to spread the heat from the rotating cylinder. The belt around the drum of the dryer is the main thing that turns the drum.

If your dryer belt is not working it can be easily replaced, which is good news. The next five steps are easy in dryer belt replacement follow:

What is the Function of a Dryer’s Drum Belt?

Belts are used in dryers to rotate the drum; the belt is wound around the exterior of the drum, looped onto a drive pulley connected to the dryer motor shaft, and then tensioned by an idler pulley.

As a result of the strain, the belt’s grip on the exterior of the drum begins to spin. If the drum is overused or the roller, glide, bearing, or pulley fails, the belt may start slipping.

The belt might eventually crack or break. The engine may keep running after the belt snaps, but the drum won’t be spinning. In the event that the dryer’s belt breaks, a belt switch may be activated, preventing further damage to the motor.

How can I determine if my dryer belt is broken?

The dryer belt is a moving part of the dryer that ensures your clothes dry evenly and quickly. You’ll be able to tell that this belt is on its way out since the dryer will make a different noise and won’t run as efficiently before it breaks. Is your dryer experiencing any of these issues which are given below?

You hear noises coming from your dryer:

Both electric and gas dryers use belts to rotate the dryer drum. The dryer’s motor is driven by a long, narrow belt that wraps around the drum and pulley. When there is a load in the dryer, the drum belt is pulled tighter by the idler pulley.

However, your dryer may start screaming or squeaking if the idler pulley wears out from too fast spinning. As it dries up, frays, and wears away, it will make a hammering or scraping sound.

When the Drum Stopped Turning:

Your dryer belt may break after years of use if worn down and neglected. If the belt snaps, the drum can no longer rotate quickly enough to twirl your clothes in the dryer’s hot air.

Even if the dryer’s warmth and motor stay running, your clothes generally won’t dry.

What breaks dryer belts?

Most dryer belts break due to either excessive friction or stress. Most clothes dryers’ drums may be used as pulleys. A belt wrapped around the drum and a small pulley driven by an electric motor turn the drum.

There may be an unsafe amount of friction if the dryer’s engine rotated while the drum remained still. If the belt becomes stuck, the pulley on the motor will heat it up via friction and eventually burn it.

If your dryer is too full, this might happen. During the drying cycle, the motor strives to keep the pulley and belt spinning despite the heavy load.

Because of the friction created when the belt tries to turn the drum, the belt might potentially snap and spark a fire in the dryer.

Steps of Dryer Belt Replacement:

There is a step-by-step guide to a dryer belt replacement. After following these steps you can easily change your dryer belt.

Step 1 Turn off the dryer:

It’s not possible to turn off the dryer without first disconnecting it from the wall outlet. The dryer may then be taken out of its cabinet for servicing if required.

Step 2 Take off the top lid along with the side panels:

It’s not as easy as it seems, but we have to find that missing belt.

First, take off the top panel, then the two side panels. The front of the machine must be completely removed in order to reach the drum from behind to install the new belt.

In this type, a smaller belt from the engine turns a tension pulley, and the belt runs over the pulley and the spring (you may find that your drum belt goes over the spindle end of the motor itself).

Step 3 Remove the Control Panel:

Alright, let’s help you dismantle the door in a less complicated way.

If you can get the water tank out of the way, the fascia should come out with a simple snap. You may then easily remove the control module by detaching its cables.

There must be an eSpares. Now for some expert advice: Take a quick photo of each plug and cable before you remove them, then use it as a guide when you’re ready to attach them back to the control panel. The fascia, switchboard, and cords have been moved out of the way.

Step 4 Take off the front door and the front structure:

Time to drop the front of the chassis!

With the top half of the door detached, you may free the wires and take off the door interlock. Currently, you need to push something under the drum so that it doesn’t have to rely only on its rear bearings to support its weight (it could be a piece of wood or a box, etc).

Once the screws have been removed, the front of the chassis may be lifted up and pulled away from the rest of the device.

Step 5 Replace the old dryer belt with a new one:

You may now replace the front section of the chassis and put the new belt on the drum to provide stronger support than what you were using before

After the belt has been slipped over the end of the pulley, the tension spring may be removed. Get a pair of pliers and gently lower the tension spring before sliding it back into place. Make sure the belt is in the right place, then spin the drum all the way by hand.

Conclusion:

Now you know the answer to how to replace the dryer belt. Now you are able to do dryer belt replacement yourself. Replacing the dryer belt is much easier. Just follow the above five steps and easily replace your dryer belt. Still, if you have any queries and don’t able to replace then you can call a pro.

Thank you friends for reading this article till the end.

Also Read: 

2 Comments

Leave a Reply

Your email address will not be published.